#PROPRESENTER 6 DISPLAY SETTINGS PASSWORD#

#PROPRESENTER 6 DISPLAY SETTINGS PASSWORD#

Now you have all the info you need to go to the ProPresenter Companion module configuration and enter the IP address of the computer running ProPresenter as well as the ProPresenter port number and controller password that you took note of from ProPresenter network preferences. Configure the ProPresenter module in Companion This is because a wired network connection is typically more reliable and has better latency - which is good for remote control. If the computers running ProPresenter and Companion are separate computers and they have the option of using either a wireless or a wired network connection, then it is recommended to use a wired network connection whenever possible. If you want to connect to ProPresenter on the same computer that you are running Companion on, you can use the special looback IP address of 127.0.0.1 (which is the default setting) Use your knowledge of networking (or Google how) to get the IP address of the computer running ProPresenter. You can control ProPresenter on any computer within the same network, you just need to know the ProPresenter computer IP address. Get the IP address of the computer running ProPresenter If you would like your StreamDeck to be able to display 'Video CountDown' timers, then you will also need to check the option for 'Enable Stage Display App' and enter a new password (or take note of the existing password).Take a note of the Port number (to the right of the Network Name) - this is typically 4-5 digits.Enter a controller password (or take note of the existing controller password).

Check the 'Controller' option (if it is not already enabled).

Check the 'Enable ProPresenter Remote' option (if it is not already enabled).

Check the 'Enable Network' option (if it is not already enabled).

Select the Network tab to configure ProPresenter network preferences.

Select 'Preferences.' to open the ProPresenter Preferences window.

Open ProPresenter and then open the 'ProPresenter (6)' Menu.Enable networking in ProPresenter if you haven't already done so. Optionally, you can also configure a connection to the Stage Display App port if you want to track the Video CountDown Timer for any video that is playing. Requires a network connection to ProPresenter via it's Remote network port. Module for using ProPresenter 6 or 7 with the Elgato Stream Deck and Companion.

Propresenter 6 display settings